Formerly Janakpur Engineering College (JEC)Affiliated to Tribhuvan University

A Welsh cement plant is building carbon capture for about 800,000 tonnes of CO₂ a year

Heidelberg Materials aims to capture around 95% of the Padeswood plant's CO₂. The first large plant sections arrive from April 2027.

BCE

Heidelberg Materials, the German cement maker, says construction of a carbon capture plant at its Padeswood works in North Wales is making progress. The project aims to capture around 95% of the existing cement plant's CO₂, about 800,000 tonnes a year, and send it to permanent storage. The first large plant sections are expected on site from April 2027. The update came with the company's third-quarter results on 4 November 2026.

  • 95%share of the Padeswood plant's CO₂ the project aims to capture
  • 800,000 tCO₂ per year to be captured and stored
  • April 2027when the first large plant sections are expected on site

What is being built at Padeswood

Heidelberg Materials reports that work on the main foundation of the Padeswood capture plant has begun. The first large sections of the plant are expected to arrive on the construction site starting in April 2027. The company describes the project as making good progress.

Once running, the plant is meant to capture around 95% of the CO₂ emissions from the existing cement works. That is about 800,000 tonnes of CO₂ each year. The captured gas is to be transported away and stored permanently, rather than released to the air.

A capture plant this size is a major civil project in its own right. It needs heavy foundations, large process vessels, compressors, pipework and a route to carry the CO₂ off site. The cement plant and the capture plant must work as one system.

Why cement is hard to clean up

Most people think of emissions as coming from burning fuel. In cement, a large part comes from the raw material itself. When limestone is heated to make clinker, it releases CO₂ as part of the chemical reaction. That share cannot be removed just by switching to cleaner fuel.

This is why the industry looks at several tools at once. It can use less clinker in each tonne of cement, use cleaner fuels in the kiln and capture the CO₂ that remains. Heidelberg's release mentions low-carbon products with a lower proportion of clinker, but it gives no figure for them.

Carbon capture deals with the emissions the other tools cannot reach. It is also expensive and uses energy, so it is usually planned for large plants where the volume of CO₂ is high. Capture is a last step after cutting what can be cut.

A pilot that tested a different method

The release also reports progress at Mergelstetten, Germany. In July 2026, Heidelberg Materials and three other European cement makers opened what they describe as the first research facility for carbon capture using the pure oxyfuel process.

At the end of May 2026, the facility produced clinker for the first time. In July, it captured its first high-purity CO₂, in the form of dry ice. These are early research steps, not commercial production, but they show the method working in a real kiln.

In an oxyfuel kiln, fuel burns in nearly pure oxygen instead of air. Because air is mostly nitrogen, removing it leaves an exhaust that is mostly CO₂ and water. That makes the CO₂ easier to separate, though producing the oxygen takes its own energy and equipment.

The business behind the project

Heidelberg Materials reported third-quarter revenue of €6,413 million, up 10% from €5,807 million a year earlier. Its result from current operations rose 9% to €1,281 million. The company kept its outlook for a 2026 result between €3.40 billion and €3.65 billion.

These figures matter because capture plants are paid for by companies that must stay profitable. A firm with a stable business can carry a large project through years of construction. The release does not give the cost of the Padeswood plant.

The company also says it expects its specific net CO₂ emissions per tonne of cementitious material to stay around the previous year's level. It links this to the first full inclusion of Akçansa, a cement business it now consolidates. The release gives no number for that measure.

What this means for Nepal's cement industry

Cement is used across Nepal in roads, hydropower and housing. The same chemistry applies here: making clinker from limestone releases CO₂ no matter where it happens. The source does not describe any project in Nepal.

A full capture plant like Padeswood is a long way from Nepal's current scale and budgets. The nearer steps for local engineers are the ones that come first in the industry's list: using less clinker, blending in other materials where standards allow and running kilns more efficiently.

Civil engineers also control how much cement goes into a structure. Good mix design, avoiding over-specification and designing for long service life all reduce the cement a project needs. The lowest-carbon tonne of cement is the one a design does not need.

What to study if this interests you

Construction materials courses explain how cement is made, what clinker is and how blended cements behave. That background makes it possible to judge claims about low-carbon concrete, because strength, durability and setting time all depend on what the cement contains.

Students interested in the plant side can look at how a capture system is laid out: the foundations, the process equipment, the compression of CO₂ and the pipeline or transport that takes it to storage. These are engineering problems in structures, fluids and energy, not only in chemistry.

When reading company releases, keep reported results apart from plans. The revenue and the Mergelstetten milestones are reported facts. The Padeswood capture figures are targets for a plant still under construction. Good analysis keeps that line clear.

Words in this story

Clinker
The main ingredient of cement, made by heating limestone and clay in a kiln, a process that releases CO₂ from the limestone itself.
Carbon capture and storage (CCS)
Separating CO₂ from an industrial exhaust, compressing it and storing it permanently underground instead of releasing it.
Oxyfuel
Burning fuel in nearly pure oxygen instead of air, which leaves an exhaust that is mostly CO₂ and easier to capture.

Where this comes from

Written in our own words; no sentence is copied from these reports. Researched with AI assistance and added 17 October 2026; no member of faculty has reviewed this story yet. If you spot a mistake, call 01-5091616 and we will correct it and say so.

Next story: 4,700 MWIndian firms hold about 4,700 MW of Nepal hydropower, but only one project is being built

Added by Imperial College of Engineering. Written 9 November 2026 from the linked sources. Faculty review is pending.